Certinside 920-138 Exam

Quality and Value for the 920-138 Exam

CertInside Practice Exams for Nortel 920-138 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

Guarantee to Pass Your 920-138 Exam

If you prepare for the exam using our CertInside testing engine, we guarantee your success in the first attempt. If you do not pass the NCSS 920-138 exam (NNCSS Succession 1000/1000M Ris.3.0 Exam) on your first attempt we will give you a Free update of your purchasing fee.

Nortel 920-138 Exams (in EXE format)

Our Exam 920-138 Preparation Material provides you everything you will need to take your 920-138 Exam. The 920-138 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

920-138 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like the certification exams, our Practice Tests are in multiple-choice (MCQs) Our Nortel 920-138 Exam will provide you with free 920-138 exam questions with verified answers that reflect the exam. These questions and answers provide you with the experience of taking the test. High quality and Value for the 920-138 Exam:100% Guarantee to Pass Your NCSS exam and get your NCSS Certification.

http://www.CertInside.com The safer.easier way to get NCSS Certification.
　
　
Exam : NORTEL 920-138
Title : NNCSS Succession 1000/1000M Ris.3.0 Exam


1. A company has a Succession 1000/1000M Rls. 3.0 system providing IP-PBX services. When the Succession administrator tries to log in to the Succession server using Element Management (EM), the error code WEB4008 is received. This error code indicates that ? LVUHFHLYHG7KLVHUURUFRGHLQGLFDWHVWKDW NO idle Teletype (TTY) is available.?What should you check in the system configuration to resolve this error?
A. Verify that the assigned TTY has service changes (SCH) listed.
B. Verify that at least two Pseudo TTYs (PTYs) are configured on the Succession server.
C. Verify that the Embedded LAN (ELAN) is configured properly on the Succession server.
D. Verify that NO other administrators are accessing the Succession system via the serial maintenance port that does NOT take up a PTY.
Answer: B

2. Click the exhibit button. A customer has a Succession 1000/1000M Rls. 3.0 system. The system outputs a FIJI0006 message and the customer reports that many Internet Telephones are out-of-service. Which action should you take to resolve the issue?
A. Initialize or Sysload the system to clear FIJI card corruption.
B. Reset the card and check the interface cable connections on the faceplate.
C. Check the status of the network card in Overlay LD 32 using the STAT NWK 6 command. Then enter the ENLG 6 command to return the network group to service.
D. Check the ring status in Overlay LD 39 using the STAT RING 0 or 1 command. Then enter the RSET and RSTR commands to reset counters and restore ring to service.
Answer: D

3. You are installing a small Succession 1000/1000M Rls. 3.0 system with four Media Gateways. Although the Media Gateways come up normally and appear to work properly when tested, one of the Media Gateway's link LEDs on the front of the Call Server's Succession System Controller (SSC) did NOT light up. Which task should you perform first?
A. Replace the IP daughterboard on the Call Server's SSC card.
B. Check the interface from the back of the Call Server to the LAN interface for power.
C. Replace the IP daughterboard on the associated Media Gateway's SSC card.
D. Verify that all of the connectors between the IP daughterboard and the Call Server's SSC card are in place.
Answer: D

4. Given the following information: ? A company has a Succession 1000/1000M Rls. 0 system providing IP-PBX services at their headquarters. ? A sister office has a Meridian 1 Internet Enabled (IE) Option 11C Rls. 25.40 that is connected to the Succession system with Primary Rate Interface (PRI) TIE lines. ? Calls can be placed and received between the two offices. ? The CallPilot 2.0 system at the headquarters is being used as the voice mail system for both offices using a Network Messaging System (NMS). ? The message waiting lights at the sister office do NOT light when a message is left in the corresponding CallPilot mailbox. ? The message waiting lights at the headquarters are working as designed. What should you check in the Succession system database at both offices to resolve this message waiting light malfunction? (Choose two.)
A. Check to see that the Multimedia Allowed (MMA) option is listed in the Class of Service (CLS) of the Automatic Call Distribution (ACD) agents using CallPilot.
B. Check to see that the Private Network Identifier (PNI) defined in the Customer Data Block (CDB) of the headquarters matches the PNI defined in the Route Data Block (RDB) of the TIE lines at the sister office.
C. Check to see that the PNI defined in the CDB of the sister office matches the PNI defined in the RDB of the TIE lines at the headquarters.
D. Check to see that Message Waiting Allowed (MWA) is defined in the CLS of each of the connecting TIE trunks defined in Overlay LD 14 at the headquarters.
E. Check to see that MWA is defined in the CLS of each of the connecting TIE trunks defined in Overlay LD 14 at the sister office.
Answer: BC

5. Given the following information: ? A company has a Succession 1000/1000M Rls. 3.0 system providing IP-PBX services. ? The system was recently upgraded from Release 1.1 to Release 3.0 successfully. ? The system is using two Voice Gateway Media Cards (VGMCs). ? The passwords for the VGMCs were CARD1 and CARD2 respectively. ? When the Succession administrator attempts to log in to the VGMCs to check the maintenance display, an error message is received stating that the passwords are invalid. ? Assume that a faulty card is NOT the cause of the error message. What does the error message communicate about the state of the VGMCs?
A. All VGMCs must be re-established in the system.
B. All VGMCs revert to the default password.
C. All VGMCs passwords are disabled and require reactivation.
D. All VGMCs revert to the PWD1 programmed in Overlay LD 17 when downloaded.
Answer: D